[Zope] FW: HELP !!!

sean.upton@uniontrib.com sean.upton@uniontrib.com
Thu, 20 Feb 2003 08:31:36 -0800


I believe that on windows this will require Python 2.2, which should
unofficially work with new versions of Zope. 

The issue here is that Carsten (or someone else) will need a C compiler to
compile this version of Python with, and they will also need to build Zope
on a machine with that same compiler, which means whoever builds the Python
binary will also need to have built a Zope install for them too.  I haven't
done this for windows, so I'm not sure of the exact details.  I would try
and see if someone on the plone-users list or on #plone on irc.freenode.net
has tackled this already, since (I think) there are a fair amount of Plone
users on Win32.

This does also mean, however, that one will need to set up and install after
getting a working Zope:

	- CMFCore, CMFDefault, CMFTopic, and DCWorkflow from cvs
(cvs.zope.org)
	- Plone 1.0.1 tarball (includes CMFPlone, Forumlator, Forumlator?)
	- Bits needed to run Zope as an NT service

Sean

-----Original Message-----
From: Chris McDonough [mailto:chrism@zope.com]
Sent: Thursday, February 20, 2003 6:50 AM
To: TANNERT,CARSTEN (HP-Germany,ex1)
Cc: zope@zope.org
Subject: RE: [Zope] FW: HELP !!!


Not without someone to volunteer to compile a largefile version of
Python for you.  I'd ask around on comp.lang.python.

- C


On Thu, 2003-02-20 at 09:36, TANNERT,CARSTEN (HP-Germany,ex1) wrote:
> I am so sorry to bother you with that but unfortunately it's windows
system
> and I installed the standalone version of Plone with zope.
> 
> Can I do it anyway ???
> 
> thx
> 
> -----Original Message-----
> From: Chris McDonough [mailto:chrism@zope.com] 
> Sent: Donnerstag, 20. Februar 2003 15:25
> To: TANNERT,CARSTEN " "(HP-Germany,ex1)
> Cc: zope@zope.org
> Subject: RE: [Zope] FW: HELP !!!
> 
> Depends on your operating system, but if it's UNIXlike, typically it's:
> 
> download Python from
> http://www.python.org/ftp/python/2.1.3/Python-2.1.3.tgz
> untar and ungz it
> cd to the directory that results
> 
> run:
> CFLAGS='-D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64' OPT="-g -O2
> $CFLAGS" ./configure --prefix=/some/directory/Python
> make
> make install
> 
> Then change the Zope "start" script's "hash bang" line to point to
> /some/directory/Python/bin/python.
> 
> HTH, 
> 
> - C
> 
> 
> On Thu, 2003-02-20 at 09:06, TANNERT,CARSTEN (HP-Germany,ex1) wrote:
> > First of all thanks for your help, but I have another question.
> > How and where can I compile the Python.
> > Sorry for the question but I am not experienced with this.
> > 
> > Thanks for your help !!!
> > 
> > -----Original Message-----
> > From: Chris McDonough [mailto:chrism@zope.com] 
> > Sent: Donnerstag, 20. Februar 2003 14:52
> > To: TANNERT,CARSTEN " "(HP-Germany,ex1)
> > Cc: zope@zope.org
> > Subject: Re: [Zope] FW: HELP !!!
> > 
> > You need to compile the Python which Zope uses to use "large files". 
> > http://www.python.org/doc/lib/posix-large-files.html.
> > 
> > On Thu, 2003-02-20 at 06:56, TANNERT,CARSTEN (HP-Germany,ex1) wrote:
> > > Here is the traceback of the error_log. Thx for the try to help me !!!
> > > 
> > >  
> > > 
> > > Traceback (innermost last): 
> > > 
> > > *	Module ZPublisher.Publish, line 98, in publish 
> > > *	Module ZPublisher.mapply, line 88, in mapply 
> > > *	Module ZPublisher.Publish, line 39, in call_object 
> > > *	Module Shared.DC.Scripts.Bindings, line 252, in __call__ 
> > > *	Module Shared.DC.Scripts.Bindings, line 283, in _bindAndExec 
> > > *	Module App.special_dtml, line 174, in _exec 
> > > *	Module App.Undo, line 92, in undoable_transactions 
> > > *	Module ZODB.UndoLogCompatible, line 29, in undoInfo 
> > > *	Module ZODB.FileStorage, line 1096, in undoLog 
> > > 
> > > OverflowError: long int too large to convert
> > > 
> > >  
> > > 
> > >  
> > > 
> > >  
> > > 
> > > -----Original Message-----
> > > From: TANNERT,CARSTEN (HP-Germany,ex1) 
> > > Sent: Donnerstag, 20. Februar 2003 12:36
> > > To: zope@zope.org
> > > Subject: HELP !!!
> > > 
> > >  
> > > 
> > > We have a lot of sites and content in a Plone web.
> > > 
> > > Now suddenly I cannot delete or rename objects in Plone and also not
in
> > > Zope.
> > > 
> > >  
> > > 
> > > I always get the following message:
> > > 
> > >  
> > > 
> > > 
> > > Site Error
> > > 
> > > 
> > > An error was encountered while publishing this resource. 
> > > 
> > > Error Type: OverflowError
> > > Error Value: long int too large to convert
> > > 
> > >  
> > > 
> > > PLEASE can anybody help me, it's really urgent !!!
> > > 
> > >  
> > > 
> > > THX
> > > 
> > 
> 



_______________________________________________
Zope maillist  -  Zope@zope.org
http://mail.zope.org/mailman/listinfo/zope
**   No cross posts or HTML encoding!  **
(Related lists - 
 http://mail.zope.org/mailman/listinfo/zope-announce
 http://mail.zope.org/mailman/listinfo/zope-dev )