[Zope] Zope 2.7 FTP Bandwidth Limiter?

Bobb rawbobb at hotmail.com
Mon Mar 1 12:42:49 EST 2004


----- Original Message -----
From: "Edward Pollard" <pollej at uleth.ca>
To: "Dieter Maurer" <dieter at handshake.de>
Cc: <zope at zope.org>; "Chris McDonough" <chrism at plope.com>; "Bobb"
<rawbobb at hotmail.com>
Sent: Monday, March 01, 2004 11:36 AM
Subject: Re: [Zope] Zope 2.7 FTP Bandwidth Limiter?


>
> On Feb 28, 2004, at 5:41 AM, Dieter Maurer wrote:
>
> >> The 100% CPU spike is likely the cause of the slow performance.  I
> >> think
> >> a reasonable strategy might be to turn on profiling in Zope 2.7 (see
> >> zope.conf profile-publisher? key, and Control_Panel -> Debug) to see
> >> what falls out of that.  I'm sure there's a lot of information about
> >> this if you google for "zope profiling".
> >
> > When the time is spent in ZServer (rather than Zope itself),
> > the profiler will not be able to report this.
> >
> > When I (once) analysed the timing behaviour of an 80 MB file
> > upload, Zope itself used only a small proportion of the complete
> > time. It turned out that "ZPublisher.Client" was responsible
> > for most of the total time (which was used as upload client).
> > It is not designed for large object transfer and forced the computer
> > into swapping.
> >
>
> So, I guess, I know that ZServer is the culprit?
>
> I'm not entirely sure how I can leverage this information into a
> solution.
>
> How about a good Monday morning helping of more information? Perhaps
> this can help inspire some insight into this quandary.
>
> This is running on a Dell Poweredge 1750 - single processor 2.4GHz P4
> Xeon with Hyperthreading. The OS is running on the mirrored internal
> HD, Zope on a NFS mounted (via TCP) volume.

Ed is the mirroring OS or hardware? (OS being much slower).
NFS is going to be slower than local (obviously).
Do you mount w/ a dns name or ip address? (dns will have to resolve first).
If dns, do you have it in a host file (faster than the lookup).
This is a good helping of info, maybe.. ;)

>
> (we've experimented in moving Zope to the local file system, as well as
> disabling hyperthreading, to test box specific issues - no speed
> increase)
> (Since we are on Linux, we cannot bind Python to a specific CPU)
>
> How we compile our Zope:
> export CC="gcc -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64
> -I/usr/kerberos/include"
> ./configure --prefix=/web/zdevl/python --with-threads
> make
> make install
>
> Stuff we add to our Zope/Python:
> python-ldap-2.0.0pre15.tar.gz
> PIL - 1.1.4 (python imaging library)
> egenix-mx-base-2.0.5
> psycopg-1.1.10
> ExternalFile ( v1-2-0 )
> LDAPUserFolder ( v2.2 - requires python-ldap )
> LocalFS ( v1-0-0 )
> VarImage ( v2.3.1 - requires the PIL -- python imaging library )
> ZPsycopgDA ( v1.1.10 - comes with the psycopg package)
> ...plus a few home-brew ZClasses.
>
> ----
>
> Ed
>
>



More information about the Zope mailing list