Fwd: [Zope3-Users] SFTP , SSL

Daniel Meier daniel.meier at perse.ch
Thu Jun 22 04:08:00 EDT 2006


hi there,

just played around a bit. so fyoi:

ssl:
----
for ssl you need pyopenssl, as stated.
then make shure when you call you don't miss the 's':

https://localhost:8443/


sftp:
-----
for sftp you need pycrypto, as written in the zope.conf.
for my 3.3 trunk version (which dated beginning of may '06),
I had to uncomment the things inside these files:

Zope3/src/zope/app/twisted/ftp/__init__.py
Zope3/src/zope/app/twisted/ftp/configure.zcml

but it seems that it is rather buggy for my part...


questions:
is there someone who knows the status of sftp implementation?
I also have troubles with webdav, what is the status there?

regds

daniel



Am 17.06.2006 um 01:02 schrieb David Pratt:

> I've had no problems on any platforms but you must be using the  
> twisted server which is default in any case.
>
> Regards,
> David
>
>
> Andreas Reuleaux wrote:
>> I just read Davids answer - interesting - and I am a bit confused:  
>> So HTTPS seems to be working now, supported and enabled? - Is this  
>> the
>> official status for SSL now? Or is it just working on Mac OS X, is
>> pyopenssl officially required - if so, then I think this should be
>> stated somewhere in the release notes.
>> I must admit it has been a while that I tried HTTPS (with no  
>> succes at
>> that time) and the "(disabled for now because of error handling
>> problems)" that I found in the release notes was just the explanation
>> I found convincing at that time.
>> -Andreas
>> On Fri, Jun 16, 2006 at 06:53:02PM -0300, David Pratt wrote:
>>> Hi Mike. Can you confirm you have pyopenssl-0.6 installed and  
>>> proper paths in your config. It should look like this in your  
>>> config if you are using the default files supplied.
>>>
>>> <sslserver>
>>>    type HTTPS
>>>    address 8443
>>>    privatekeypath $CONFDIR/server.pem
>>>    certificatepath $CONFDIR/server.pem
>>> </sslserver>
>>>
>>> Just to let you know I am running on mac and everything is fine  
>>> for me. I am on OSX 10.3.
>>>
>>> Regards,
>>> David
>>>
>>> Mike Emerick wrote:
>>>>
>>>>  I have been trying to get the SSL server and the SSH server  
>>>> running with Zope 3. When I uncomment ssh server in the  
>>>> zope.conf file I get the following.
>>>>
>>>> Traceback (most recent call last):
>>>>  File "./runzope", line 48, in ?
>>>>    run()
>>>>  File "./runzope", line 44, in run
>>>>    main(["-C", CONFIG_FILE] + sys.argv[1:])
>>>>  File "/usr/local/Zope-3.2.1/lib/python/zope/app/twisted/ 
>>>> main.py", line 74, in main
>>>>    service = setup(load_options(args))
>>>>  File "/usr/local/Zope-3.2.1/lib/python/zope/app/twisted/ 
>>>> main.py", line 151, in setup
>>>>    service = server.create(db)
>>>>  File "/usr/local/Zope-3.2.1/lib/python/zope/app/twisted/ 
>>>> server.py", line 204, in create
>>>>    servertype = zapi.getUtility(IServerType, self.type)
>>>>  File "/usr/local/Zope-3.2.1/lib/python/zope/component/ 
>>>> __init__.py", line 257, in getUtility
>>>>    raise ComponentLookupError(interface, name)
>>>> zope.component.interfaces.ComponentLookupError: (<InterfaceClass  
>>>> zope.app.twisted.interfaces.IServerType>, 'SFTP')
>>>>
>>>>
>>>> I have looked every all over for a solution.  I can confirm this  
>>>> on Suse Linux  10 and Mac OS 10.4 and 10.3. Has anyone seen  
>>>> this.   SSL gives a similar error just replace the SFTP with SSL.
>>>>
>>>>                                 Thanks,
>>>>                                         Mike
> _______________________________________________
> Zope3-users mailing list
> Zope3-users at zope.org
> http://mail.zope.org/mailman/listinfo/zope3-users


Telefon: +41 44 586 68 86
Skype: perse.engineering





More information about the Zope3-users mailing list